Planning for first cut Silage 

Quality must not be compromised over quantity as first cut silage get underway. Regular monitoring of silage swards is just as important as monitoring a grazing sward. The digestibility or Dry Matter Digestibility (DMD) of silage is largely influenced by the growth stage at which the grass is cut and ensiled.

Cutting height will also influence sward regrowth. By raising the cutting height, grass plants are not forced to utilise energy reserves to produce a new leaf, this also reduces the interval between silage cuts. Avoiding clamp contamination from the outset is crucial. Pastures that have been rutted should be rolled to minimise the introduction of soil to the clamp. Excessive soil within the clamp encourages clostridial development and increases the risk of poor silage fermentation.

Where swards are allowed to go to seed before harvest, the digestibility of the silage will be compromised. Like most other plants, grass goes through a vegetative stage and then a reproductive stage, at which point lignin content increases. To ensure reproduction is a success, the grass begins to incorporate lignin into its tissue which helps keep the seed head upright. This lignin is indigestible to ruminants and can reduce the DMD of grass silage significantly. Research has also shown that crude protein (CP, 160 vs 109g/kg DM), water soluble carbohydrates (WSC, 133 vs 107g/kg DM) and metabolisable energy (ME, 11.9 vs 10.5MJ/kg DM) content decline as the grass matures. This may prove very costly as nutritional losses will need to be buffered with concentrates.

Tedding out as soon as possible after mowing is recommended as dry matter levels are increased. This process also minimises the proliferation of undesirable bacteria and moulds within the swath.

It is crucial for lactic acid producing bacteria (LAB) to dominate within the clamp in order for a good fermentation to take place. These bacteria utilise the grasses natural soluble sugars and excrete lactic acid, reducing the pH of the clamp to 4.

Cutting in the middle of the day when sugar levels peak is advisable. Inoculants may also be used to increase the amount of lactic acid producing bacteria within the clamp. Grassland will utilise 2.5 kg N/ha/day (equivalent to 2 units of N/acre/day) under ideal growing conditions. Nitrogen acts as a buffer within the clamp and can have a negative impact during the fermentation process, so nitrogen supply is particularly critical. Too much will affect fermentation; too little and yields and crude protein content could be poor.

Correct management is key to ensuring a quality silage. It is important that producers focus on the quality of the end product and not just on getting value for money from the contractor by producing a bulky, stemmy crop.

Bale Wrapping Tips: 

Storing of wrapping film

  • Try and keep the film in its original packaging until you need to use it, (ideally in shady place)
  • Avoid taking out of the box for as long as possible! (until you need to use it)
  • Don’t leave the rolls on the wrapper

Before wrapping:

  • Follow the manufacturer’s instructions for the maintenance of the wrapping machine
  • Ensure the pre-stretching system height is correct, line up the centre of the roll with the centre of the bale
  • Clean the wrapping machine, particularly pre-stretch rollers of tack (glue deposits)

Wrapping:

  • Wrapping should be done (ideally) within 2 hours of baling
  • Don’t wrap during the hottest part of the day!
  • The glue face of the film must be in contact with the forage.
  • Wrap the bales at the stack
  • For dry forage material (50%DM +) use a minimum of 6 layers!
  • Avoid using different colour films
  • Don’t leave any opened rolls on the machine – return back to its box and store in a shady place

Storage:

  • Move the bales from the field as quickly as possible
  • Handle the bales as little as possible
  • Store the bales upright, with a maximum 3 layers high
  • Store bales away from trees and water
  • Store bales close to where they will be used, on a prepared flat surface
  • Check the bales regularly; seal any bales of holes and scratches
  • Ensure they are protected from birds and rodents

Related advice

Agronomy

Planning for first cut Silage 

Quality must not be compromised over quantity as first cut silage get underway. Regular monitoring of silage swards is just as important as monitoring a

Feeds

Creep Feeding Lambs

When it comes to having a profitable sheep enterprise, it is crucial that your lambs get off to the best possible start. In the first